AeriCam Products

AeriCam Flight Demo from Jason Lam on Vimeo.

AeriCam-Golf Course Aerial Photography from Jason Lam on Vimeo.

Aericam Flight Demo from Jason Lam on Vimeo.

Complete Ready to Fly AeriCam

Product Specifications:
Payload–Recommended up to 7 Lbs.
Total Flying Weight-with 6Lb camera approx. 26lb(11.8Kg).
Dimension-Heigh-29″(74cm), Width-21″(53cm), Length-54″(137cm)
Camera Dimension-Fits cameras within 7″ Wide, 8″ Tall, approx. 14″Long
Flight Time-5 to 8 minutes Depending on Payload. More Flight time with Bigger Battery.
Flight Range–Visual range, Approx. 400 ft Height, 1,200 ft. Lateral.
Flight Conditions-approx. max Wind, 25mph for Photos, 15mph for Video and film.
Blades—830mm(32.7″), Total 1,700mm(67″) Precise Balanced, Carbon Fiber.
ESC—63 Volt 120A, 200A for 15sec.
Motors–Brushless electric motor, 3800Watt(5.1 HorsePower), 95Amps.
Swatch Plate Servo–Futaba s9252
Gyro–Futaba GY520 w/Heading Hold
Radio–Futaba 10C 10-Channel 2.4GHz
Receiver–Futaba R6014FS
Flight Stablization–Head Holde Gyro Flight Stablization
**GPS Flight Stablization Option Available.
**If our current Model Don’t Fit your Needs, We Can Custom built a Smaller, or Bigger AeriCam for You.**

Please Contact Us for Quotes.

Lead Time- 6 to 8 weeks for Complete setup.

**Click to Download Full Specs for AeriCam**

Aericam VPX Flying at Yankee Stadium from Jason Lam on Vimeo.

AeriCam VPX (Video Pro Xtreme) recently flown by one of our customer on his High Profile Video Commercial inside Yankee Stadium with an 8.5lb SI-2k Mini Camera at 25.5lbs total flying weight. Thus, have successfully filmed with Panasonic 170, Sony EX1 and now the SI-2k Mini.

The VPX is a simpler Roll and Tilt design with flybarless head to minimize vibration. Advantages of the VPX are that it has less moving parts on the gimbal and helicopter head to reduce vibration, more aerodynamic than 3 axis setup, lighter, more payload, more compact, Lower Center of Gravity and better weight distribution.

Please Contact us for Quote.

Lead Time-2 to 4 week for Kit, 6 to 8 weeks for Complete setup.

Product Description:
Custom Built Camera Support Frame for Joker Maxi 2, and Maxi 3
Custom Built Version Also Available for Vario/AirStar Evolution
Motor Shifted to rear
Best CG for Front mounting
Front Pan, Roll and Tilt mounting for precise filming needs.
Front Roll, Tilt mount for action flying.
Carbon Fiber Landing Gear
6061 aluminum frame
Custom Anodize color

3 Axis Gyro Stabilize Camera Mount—AeriCam from Jason Lam on Vimeo.

Product Description:Specifications:
Axis: 3 Axis Camera mount(360Pan, 360Tilt, 360Roll)
Mounting: Front mounting (Pan, Tilt, Roll), or (Tilt, Roll) and under slung 360
Material: 6061 Aluminum
Weight: 4lb front mount, 4.8lb 360 mount
Payload Capacity: recommended up to 7lbs.
Gear: Direct Drive on 3 Axis
Gear Ratio: 5 to 1, or 6 to 1, or Custom
Servo:Hitec HS-7940TG(Speed and power 6v,0.7sec 220oz of torque), Or HS-7950TG(Monster Torque, 6v, .15, 486oz of torque)
–Highlights—
Custom Anodizing color
Under Slung 360 Landing Gears
Dual pan and tilt servos capability.
***Option-IMU(Inertia Measuring Unit) and Gyro Stabilization for 3 Axis Available***

3 Axis Gyro Stabilize Camera Mount—AeriCam from Jason Lam on Vimeo.

Product Description:Specifications:
Axis: 3 Axis Camera mount(360Pan, 360Tilt, 360Roll)
Mounting: Front mounting (Pan, Tilt, Roll), or (Tilt, Roll) and under slung 360
Material: 6061 Aluminum
Weight: 4lb front mount, 4.8lb 360 mount
Payload Capacity: recommended up to 7lbs.
Gear: Direct Drive on 3 Axis
Gear Ratio: 5 to 1, or 6 to 1, or Custom
Servo:Hitec HS-7940TG(Speed and power 6v,0.7sec 220oz of torque), Or HS-7950TG(Monster Torque, 6v, .15, 486oz of torque)
–Highlights—
Custom Anodizing color
Under Slung 360 Landing Gears
Dual pan and tilt servos capability.
***Option-IMU(Inertia Measuring Unit) and Gyro Stabilization for 3 Axis Available***

3 Axis Gyro Stabilize Camera Mount—AeriCam from Jason Lam on Vimeo.

Product Description:Specifications:
Axis: 3 Axis Camera mount(360Pan, 360Tilt, 360Roll)
Mounting: Front mounting (Pan, Tilt, Roll), or (Tilt, Roll) and under slung 360
Material: 7075 main frame and 6061 interlocking parts
Weight: 3.8lb front mount, 4.6lb 360 mount
Payload Capacity: recommended up to 7lbs.
Gear: Direct Drive on 3 Axis
Gear Ratio: 5 to 1, or 6 to 1, or Custom
Servo:Hitec HS-7940TG(Speed and power 6v,0.7sec 220oz of torque), Or HS-7950TG(Monster Torque, 6v, .15, 486oz of torque)
–Highlights—
Custom Anodizing color
Under Slung 360 Landing Gears
Dual pan and tilt servos capability.
***Option-IMU(Inertia Measuring Unit) and Gyro Stabilization for 3 Axis Available***

3 Axis Gyro Stabilize Camera Mount—AeriCam from Jason Lam on Vimeo.

Product Description:Specifications:
Axis: 3 Axis Camera mount(360Pan, 360Tilt, 360Roll)
Mounting: Front mounting (Pan, Tilt, Roll), or (Tilt, Roll) and under slung 360
Material: 7075 main frame and 6061
Weight: 3.8lb front mount, 4.6lb 360 mount
Payload Capacity: recommended up to 7lbs.
Gear: Direct Drive on 3 Axis
Gear Ratio: 5 to 1, or 6 to 1, or Custom
Servo:Hitec HS-7940TG(Speed and power 6v,0.7sec 220oz of torque), Or HS-7950TG(Monster Torque, 6v, .15, 486oz of torque)
–Highlights—
Custom Anodizing color
Under Slung 360 Landing Gears
Dual pan and tilt servos capability.
***Option-IMU(Inertia Measuring Unit) and Gyro Stabilization for 3 Axis Available***